Gardner® SK-7005 White-Kote™ Elastomeric Roof Coating, White, 4.75 Gallon

Gardner® White Roof Coating is a tough, flexible, white acrylic roof coating. Resists cracking and peeling while extending the life of the roofing substrate. It expands and contracts with the roofs movement to resist damage. Also provides a protective barrier which reflects the suns heat and destructive UV rays. In turn, this helps to cool surfaces and leads to a reduction of roof temperatures.When applying, if roof becomes hot (over 100° F) during application, lightly mist roof surface with water spray to prevent coating from drying too fast. Remove any excessor puddling water prior to coating. If roof surfaces become soiled as they age, due to the elements, Elastomeric can be cleaned with a mild water and bleach solution.

• Size: 4.75 gallon
  
• A tough, flexible, white acrylic roof coating
• Helps reduce roof temps
• Resists cracking and peeling while extending the life of the roofing substrate
• Also provides a protective barrier which reflects the sun's heat and destructive UV rays
• In turn, this helps to cool surfaces and leads to a reduction of roof and interior temperatures.

Preparation:

• All surfaces must be dry and free of dust, dirt, oil, loose granules, gravel or peeling paint and all other foreign matter. Roofs must have proper ventilation. Rusty metal must be cleaned with a wire brush and primed. Pressure washing entire surface is recommended. For best results (use only a wide fan spray tip). Repair all leaks and cracks with White Roof Patch and Stress Block Seam and Repair Fabric in accordance with product instructions. Surfaces previously coated with aluminum, asphalt or tar should be allowed to cure for a minimum of one summer season prior to coating with this product. Surfaces with mildew growth or stains must be cleaned with a bleach solution (2 parts water to one part bleach). Be certain all surfaces are thoroughly rinsed and dry prior to applying coating.

Application:

• Surface and air temperatures must be a minimum of 55°F and rising. DO NOT apply if heavy dew or rain is expected within 24-48 hours. Apply on clear, sunny day in morning hours with a 3/4” nap exterior paint roller. First, apply one coat over all seams and joints. Allow to cure for one hour or until dry, then apply two (2) uniform coats over entire surface, avoiding excessive rolling. Two full coats are needed for all applications. Apply second coat perpendicular to first coat. Allow at least 24 hours between coats and 24-48 hours for full curing. DO NOT apply to flat surfaces, poor drainage areas, or where ponding water will exist. Not for use on epdm or some single ply membranes. Roofs must have proper ventilation.
  

Coverage rate:

• Approximately 50-75 sq. ft. per gal. per coat. (Total Coverage for two (2) coat application is 25-35 sq. ft. per gallon.)

Note:

• If roof becomes hot (over 100°F) during application, lightly mist roof surface with water spray to prevent coating from drying too fast. Remove any excess or puddling water prior to coating. If roof surfaces become soiled as they age, due to the elements, Elastomeric can be cleaned with a mild water and bleach solution. Excess scrubbing should be avoided. If coloring is desired, a typical addition of 3-4 ounces per gallon of Universal colorant can be added, which will result in light pastel colors. Note: Color tinting will disclaim warranty.

Clean-up:

• Clean tools with soap and water.In 24-48 Hours.